Thermax - Item # 20-ATEN-1932, MIL-W-22759/12 wire - extruded PTFE insulation
Sitemap
 
  
Search Catalog
      GO   
 All Categories    MIL-W-22759/12 wire - extruded PTFE insulation
All Categories > Aerospace Wire and Cable > M22759 (SAE AS22759) wires > MIL-W-22759/29 wire - PTFE/polyimide insulation > UL 1726; 300V Wire- Extruded PFA Insulation (Thin wall) > UL 1727; 600V Wire- Extruded PFA Insulation (Thick wall) > MIL-DTL-81381/18 wire-light weight > UL 5107 (600V) Wire- Ultra-high-temperature, Abrasion Resistant > MIL-W-22759/12 wire - extruded PTFE insulation > Item # 20-ATEN-1932  
Request Information

Item # 20-ATEN-1932, MIL-W-22759/12 wire - extruded PTFE insulation



    Print Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

No name specified

larger image
MIL-W-22759/12 wire - extruded PTFE insulation
MIL-W-22759/12 wires have extruded PTFE isulation for high-temperature applications where the additional abrasion resistance of mineral-filled PTFE insulation is not required.These wires are especially well-suited in applications where smoke emission, overload stability, and flammability are major concerns. These wires are similar to MIL-W-22759/9 and /10 wires, but have a thinner-wall insulation and 600V voltage rating.

Specifications

Conductor Size (AWG)

20

Voltage rating - volts

600

Temperature rating °C

-55 to 260

Conductor

Nickel-Plated Copper

Conductor Diameter - inches (mm)

.038 (.97)

Stranding

19/32

Insulation

Thin-wall extruded PTFE

Insulation Diameter Minimum - inches (mm)

.056 (1.42)

Insulation Diameter Maximum - inches (mm)

.060 (1.52)

Weight - pounds/1000 feet (Kg/1000m)

5.19 (7.72)

Maximum Resistance Ohm/1,000 feet (ohm/Km), @ 20°C

9.77 (32.0)

Request Information